8x6 and 8x2 Wet Taps Completed in Blaine

Wet taps are one of those jobs where there's no room for error. You're making a live connection to an active water main - meaning the system stays pressurized and online the entire time. That's exactly what we were out in Blaine doing, completing both an 8x6 and an 8x2 wet tap on the same site.

Most people don't realize how much goes into this kind of work before the first tool hits the pipe. You have to plan the connection points carefully, make sure your tapping sleeve and valve are properly fitted and torqued down, and then execute the cut without losing control of the water. The tapping machine does its job, but the crew has to be dialed in every step of the way.

What you're looking at here is the work mid-process - sleeve clamped, valve seated, and our guy on the drill working through the tap. The red gate valve assembly is fully bolted and ready to isolate the new branch line once the connection is made. It's methodical, focused work. You don't rush it.

Wet taps are the go-to solution when a system can't be shut down - whether that's a municipal water main, a distribution line serving multiple properties, or any situation where taking the line offline isn't an option. We've done enough of these to know that experience matters more than almost anything else on a job like this.

If you need tapping work or underground utility service, we bring the equipment and the know-how to get it done right the first time.